Scope Leveling Kit
If you are a serious long range shooter you understand how critical proper scope alignment is. After more requests than I can count we have made our shop tools available to the public. The Defensive Edge Scope Leveling kit is a simple, accurate and fast way to get critical scope alignment all squared away. Our kit comes with 3 levels that allow you to correctly mount almost any scope properly. In addition you can use the # 3 level to check and / or adjust your cosine / angle indicator. Compete instructions are included, this is a must have item for the precision shooter.
Price $59.95
The RF Cam Cradle is one of best pieces of gear we have started using in the past few years. It was specifically designed by RLC customs for the person who has to be spotter, cameraman and everything else at the same time. It is a mount that you can sink your camera to your spotting scope and have your range finder all in the same cluster. I used one for most of this last hunting season and discovered that besides the speed that you can do all of those things the best attribute was that it is so easy to get footage you tend to take more footage and not miss capturing some the cool thing you see while hunting. This will become a near mandatory piece of gear for filming future volumes of “Send It”.
$189.95
I addition to becoming one of our favorite pieces of new gear in 2015 it has really helped in ways we never thought of prior to using it. If you get video of everything because it is just easy, you have video to review in the field. This has saved the day on animal recovery a number of times for us. Check out our video on it at :
Defensive Edge
Mountain Precision Hunter – Chassis
The MPH Chassis was designed out of the need for a detachable mag lightweight chassis for bolt action rifle builds. I have owned rifles of almost every action type and configuration, none of them I have hated. There have been some platforms I have liked better than others and have spent a great deal of time with. Sniper rifles and the guns standard to 3 gun competition have been my mainstay platforms for the last 30 years. I have fired hundreds of thousands of rounds through these platforms. So when the idea of a super lightweight chassis rifle started to occupy my mind I started to blend them together.
Objectives:
- Simple design nothing complicated to run or operate
- Sleek to move through terrain and brush effectively
- Detachable magazine – this will limit some caliber but allow most.
- Must use AI pattern magazines, although modifying them would be OK
- Use the highest quality and technologically advanced materials available
- Designed as a field rifle chassis not a competition chassis
- Balance and feel must be 100%
- Equally effective shooting from unsupported positions as good as it works prone
- Must have a reasonable long range ability based on platform not cartridge
- Detachable magazine or any other features must not rattle or make noise, period
- Must have sling mounting options available
- Must be bipod adaptable for Spartan, UM stud mounts or Pic rail bipods
- Platform must not flex or be unstable in any position
- Must have adjustable cheek piece
- Butt stock design must work with rear bag
- Must be adaptable for cant and LOP in kit form
- Weight must be very close to 30 oz., there are plenty of 60 oz. or heavier chassis available
Details:
- Main chassis body, recoil lug assembly, machined from 70 series alloy
- Alloy finished Anodizing
- Carbon fiber tube butt stock made form thick wall high modulus tubing
- Forend tube made from standard wall high modulus tubing
- Side panels made from .125” thick high modulus flats
- Butt stock made from 28,000 psi high impact, wear resistant Nylon
- Cheek piece made from Kydex
- Stock may be assembled with cant or LOP at whatever the end user desires
- Forend may be shortened to accommodate shorter barrel applications
- Barreled action may be removed from chassis with only 3 bolts for service / cleaning
- Almost any AR 15 grip may be adapted to the platform but is supplied with an Ergo grip
- Recoil pad is a 1” Decelerator
- Fits any Remington 700 footprint action left or right handed, LH panels required for LH applications
- Will accept barrel profiles up to #5 taper, ideal taper is a #4 fluted for best weight / accuracy combination
- Carbon Fiber contact points (stock and forend) much nicer in cold weather than an aluminum chassis
- Chassis with 3 round AI mag, grip, butt stock dressed out except barreled action and scope weighs 29 oz. Since the AI mag weighs 5.5-6.0 oz this make the MPH comparable to most of the high end lightweight stocks on the market or even a little lighter. No one makes an adjustable cheekpiece chassis that comes even close.
Using an ultralight action like some of the titanium offerings or alloy / steel hybrids on the market it is possible to build a rifle that weighs 6.5 lbs with a detachable mag chambered in something with some legs like the 7 WSM etc. We have shot the prototype with a standard Remington 700 action, # 3 Hart fluted barrel and Nightforce 2.5-10 NXS, Spartan bipod (total weight 8.7 lbs / 7.2 LBS WO Scope) very effectively out to 1200 yards.
Chassis Price $1100.00
Defensive Edge Cheek Piece for the Rem 700 PSS or Sendero
HS Precision stocks, MIA Factory stocks, Winchester Varmint and others.
The cheekpiece is adjustable for 1 inch, weight less than 3 oz.
Coin adjustable requiring no tools.
Solid and installs in minutes.
$79.95 Uninstalled
$99.95 Installed
DE Recoil Lug
The new DE recoil lug is designed for the Remington 700, 600 & 40X series rifles, it is also adaptable to other rifles in need of good lug like some of the Savage rifles. The DE recoil lug is CNC machined from 416 SS and surface ground to ensure perfect dimensions. It will fit the HS Precision stocks without shortening the lug to machining into the aluminum action cradle. Like all DE products it is built with one thing in mind, to be the best we can make.
PRICE $28.00
This is a Pod Locker for the Harris ® “S” series bipods.
PRICE $26.00
Harris “S” series swiveling bipods with Pod-locker installed, these are our favorite setup for getting the front end solid in the field.
PRICE $140.00
No more broken front studs from bipod mounting or rugged use.
PRICE $18.00
Nightforce Pic rail mounts with 20 and 40 MOA of taper.
We carry for the Remington short and long action
PRICE $135.00
We use these rings in concert with the Nightforce tapered Pic rail mounts and stock them in heights of .885″ 1.00″ 1.125″ AND 1.265″
PRICE $165.00
The Nightforce has become our favorite mount on our custom long range rifles and will accept our ACI/ACD mount.
Price $245.00
Nightforce scopes are the scope we turn to for our long range needs.
We usually stock the NXS 5.5-22x56mm and the ATACR with the MOAR-T reticule
Call for pricing 208-687-2659
This is our new ring cap mount for Anti Cant and Angle Cosine Indicators.
It fits any Nightforce ring set, Uni Mount or Direct Mount.
It is manufactured from the same 7075 Alloy that the
NF LW rings sets are made from and hard anodized matte black.
It is available as a mount only or complete with the “Sniper Tools ACI”
ACI/ACD MOUNT COMPLETE W/ INCDICATOR $205.00
(Does not include the lower half of the ring or direct mount)
ACI/ACD MOUNT ONLY $100.00
ANTI CANT ONLY $75.00
BOTTOM CAP ONLY $30.00
DE Bolt Release
The new DE bolt release is designed for the Remington 700, 600, 660, M7 & 40X line of rifles. It can be fitted to many others. The release is CNC machined from 416 SS or chromemoly steel, it is not cast, stamped or made in anyway to cut costs, it is built only to be the best. Complete machining instructions included.
PRICE $32.00
.750″ Muzzlebrake
Our new line of muzzlebrake blanks were developed because we simply could not find one that did what we wanted and was made the way we like. Our brakes are all CNC machined from 416 SS or Chromemoly steel. DE brakes do not have any porting on top dead center or bottom dead center to prevent flying debris and direct back blast to the shooter. De brakes keep the rifle level and reduce recoil by more than half. Break performance will of course depend on several things like gas volume, bullet weight, barrel length, & shoulder to bore line height to name a few. All DE brakes come in blank form and need to be fitted by a smith. They will need to be reamed to diameter, faced, indexed and tapered to the barrel.
PRICE $80.00
D.875″ Muzzlebrake
Our new line of muzzlebrake blanks were developed because we simply could not find one that did what we wanted and was made the way we like. Our brakes are all CNC machined from 416 SS or Chromemoly steel. DE brakes do not have any porting on top dead center or bottom dead center to prevent flying debris and direct back blast to the shooter. De brakes keep the rifle level and reduce recoil by more than half. Break performance will of course depend on several things like gas volume, bullet weight, barrel length, & shoulder to bore line height to name a few. All DE brakes come in blank form and need to be fitted by a smith. They will need to be reamed to diameter, faced, indexed and tapered to the barrel.
PRICE $80.00
1.000″ Muzzlebrake
Our new line of muzzlebrake blanks were developed because we simply could not find one that did what we wanted and was made the way we like. Our brakes are all CNC machined from 416 SS or Chromemoly steel. DE brakes do not have any porting on top dead center or bottom dead center to prevent flying debris and direct back blast to the shooter. De brakes keep the rifle level and reduce recoil by more than half. Break performance will of course depend on several things like gas volume, bullet weight, barrel length, & shoulder to bore line height to name a few. All DE brakes come in blank form and need to be fitted by a smith. They will need to be reamed to diameter, faced, indexed and tapered to the barrel.
PRICE $80.00
Defensive Edge Micro Slab Brake is based off an .875” brake and is slabbed down to nearly the barrel diameter. These brakes require fitting and must be installed by a competent gunsmith.
Micro Slab Brake SS 100.00
Micro Slab Brake SS installed 200.00
Defensive Edge Slab Brake on a Sendero contour barrel.
The Slab brake was the first of the “slab” designs we worked with and have been using it for quite some time. It is based off a 1.500” 5 port brake and then slabbed down to near barrel diameter. The extra baffle width is really noticeable on larger magnums like the 338 Terminator and is our standard LRKM brake.
Slab Brake 200.00
Slab Brake Installed 300.00
The Defensive Edge – Terminator Tuner was designed specifically for the CZ line of Varmint / Target rifles. It is however usable on any .22 barrel with a straight taper .875” or smaller. It can also have a reduced muzzle shank of .875” or smaller to fit the tuner to.
Attachment: DE no thread tension collar
Adjustment: Micrometer Adjustable
Adjustment Range: .800”
Weight: 12.3 ounces with all weights attached
The Terminator Tuner had a “bump shoulder” for repeatable installation when being removed for cleaning. This allows you to remove and clean then install with no loss of tune to your rifle. The Terminator Tuner is the easiest way to get the most out of your factory or custom barrel. As good as our tuner is it will not turn a crappy barrel into a match winner, it will allow you to wring out the best possible accuracy from your platform. If you want a tuner for a rifle other than a CZ all you need to do is call us with your muzzle diameter and we can spin up a tension collar for your application. The tuner will not fit on tapered barrel profiles.
NOW AVAILABLE – CALL TO ORDER 208-687-2659
$225.00 + shipping / handling
Terminator Die Sets
Terminator Die sets are built in house to our exacting specs. They are machined from hex stock, reamed with a resizing reamer to perfectly match our chamber reamers. The bodies are salt bath nitrided for a super hard and slick finish that odesn’t render the die to brittle and prone to cracking like some dies we have expereinced in the past. Standard die sets include a full length bushing die that accepts Redding bushings, decapping pins and stems. The seating die is a floating collar micrometer seating die. In addition deluxe kits are available to includ ethe 2 die set, a shell holder, 3 neck bushings, a custom shoulder bump guage, spare decapping pin & modified OAL case guage. These sets all come in large divided plastic cases, large enough for the dies and all of the misc tools that go with the reloading process.
Available in: 224 Terminator, 243 Terminator, 260 Terminator, 284 Terminator, 300 Terminator, 338 Terminator & 338 Edge
Standard Die Set $395.00
Deluxe Die Set $495.00
We have 3.0″ and 4.0″ stainless steel centerfeed magazine boxes for use with Remington 700 actions or suitable custom actions using a 700 footprint. Follower included.
$65.00
Installed on your action $200.00